A junctor is a circuit used in analog telephone exchanges, including the Number One Crossbar Switching System, Number Five Crossbar Switching System, 1ESS switch and other switches.

In early electromechanical switches, a "district junctor" handled supervision and talk battery duties for outgoing calls,[1] similar to the duties of the cord circuit of manual exchanges. The junctors for incoming calls were simple three-wire connections between the incoming frame and the line frame. In the later electromechanical 5XB switch, junctors only consisted of three wires to connect the two legs of a call: the line and the trunk,[2] of which the latter supplied all talk battery and supervision.

Stored-program analog switches such as the 1ESS switch, had both simple wire junctors and circuit junctors. Circuit junctors were in the form of plug-in circuit boards to provide talk battery and supervision for intraoffice calls and were closely similar to intraoffice trunk packs, with two scan points and two signal distributor points per circuit, two circuits per plug-in pack. Wire junctors were two-wire connections between trunk nets and other trunk nets or line nets. When three-way calling was introduced, three-port conference trunks were used, which only appeared on trunk nets. All junctors appeared in subgroups of sixteen on plugs or jacks at the Junctor Grouping Frame, where, as many subgroups as required, were plugged into other trunk nets, line nets, or circuit junctor frames.

References

edit
  1. ^ Scudder, F.J.; Reynolds, J.N. (January 1939). "Crossbar Dial Telephone Switching System". Bell System Technical Journal. 19 (1): 90.
  2. ^ Bell Telephone Laboratories (1949). No. 5 Crossbar - Bell Labs Record Compilation. pp. 20–25.


Stub icon

This article related to telephony is a stub. You can help Wikipedia by adding missing information.

📚 Artikel Terkait di Wikipedia

Number Five Crossbar Switching System

dividing each switch into a line switch and a junctor switch. Each of the ten junctor switches have ten junctors on its ten verticals, and each of its ten

Number One Electronic Switching System

also called Junctors. Junctors were gathered into cables, 16 twisted pairs per cable constituting a Junctor Subgroup, running to the Junctor Grouping Frame

Gennadius junctor

described by Carl Heinrich in 1956, and contains a single species, Gennadius junctor. It is found in French Guiana. "GlobIZ search". Global Information System

Mongolian language

(who uses the term "postposition" for both and the term "conjunction" for junctors). Sečenbaγatur (2003): 152–153. Johanson (1995) Mizuno (1995) Pürev-Očir

Primitive recursive function

{\displaystyle \operatorname {If} } function, it is easy to define logical junctors. For example, defining And = If ∘ ( P 1 2 , P 2 2 , C 0 2 ) {\displaystyle

Cord circuit

task was done by a supervisory relay set known variously as junctor circuit or district junctor. Later designs made it a function of the trunk circuit or

Permanent signal

mid-20th-century switching equipment, a permanent signal would tie up a junctor circuit, diminishing the ability of the switch to handle outgoing calls

Resolution (logic)

is stronger than Murray's. Moreover, it does not introduce new binary junctors, thus avoiding a tendency towards clausal form in repeated resolution.